A dirty engine does not pose a particular threat to the car, but there are a number of features, due to which the internal mechanisms need to be kept clean. Despite the fact that washing the engine of a motor vehicle is a cosmetic procedure, all motorists should understand why to perform it. Well, if your car hasn’t had an engine for a long time, then scrap it: https://scrap4cash.com/.

The main reasons for conducting an electric motor wash:

Leaking technical fluids. Accumulation of dirt on the engine makes it difficult to control the flow of coolants and engine oil. In this regard, if a problem occurs, the driver will not timely detect a lack of fluid, which ensures the performance of the mechanisms of the working functions and will not be able to quickly fix the problem.
Engine overheating. Dirt buildup on your vehicle’s powertrain prevents it from dissipating heat, which can cause a loss of performance and an increase in fuel consumption. All of this contributes to rapid wear and tear on the vehicle’s parts, and increases your costs for future maintenance and repairs.
Current leakage. A layer of dirt on the electrical wiring makes it difficult to start the engine.
Fire hazard. Oil residue that builds up in the engine compartment dissipates as you drive and converts to hot fumes. Since they can easily ignite, a clean engine is safer.

Of course, a clean engine is nicer and easier to service, and some repair shops may even refuse to take a car with a dirty internal mechanisms for repair.

How to properly wash the engine?
Important! Under no circumstances do not wash the aggregate with water under high pressure. A strong jet can cause corrosion processes in the alternator, trambler and various relays, damage the insulation, as well as wash away important stickers in the engine compartment.

You can wash the engine yourself with a solution of water and shampoo or a spray specially designed for this purpose. It is better to clean with a small stream of water, having previously insulated all the parts that are afraid of moisture with polyethylene. After self-cleaning of the power unit you will get rid of burnt technical fluids, oil stains and salt residues. The optimum number of engine flushing procedures is 1 or 2 times a year.

Leave a Reply

Your email address will not be published. Required fields are marked *